|
|
Working frequency band | 2.4GHz | 5GHz |
Spatial flow number | 2 | 2 |
Bundling | Support 40Mhz,not recommended | 80MHz bundling |
MU-MIMO | NA | Support |
867Mbps (PHY) | NA | NA |
400Mbps (PHY) | Support | Support |
A-MPDU | Support | Support |
Maximum similarity Demodulation (MLD) | Support | Support |
Maximum well ratio reception (MRC) | Support | Support |
Space-time block code (STBC) | Support | Support |
Low density parity code LDPC) | Support | Support |
Maximum support virtual AP number | 16 virtual AP with single radio frequency | |
Maximum number of access users | 256 (actual number of users varies due to factors such as application environment) | |
Maximum connection rate | _ 2.4GHz: 300Mbps 5GHz: 867Mbps | |
RTS/CTS | Support | |
CTS-to-self | Support | |
Hide SSID | Support | |
Terminal aging, heartbeat detection | Support | |
AP mode |
Bridge mode (layer 2) routing mode (layer 3) |
|
Client mode |
Support for Clent mode Support for MAC address cloning |
|
Load balancing |
Support load balancing based on number of users and user traffic |
|
5G priority |
Support |
|
Automatic channel selection |
Support |
|
Automatic power regulation |
Support |
|
Intelligent rate selection algorithm |
Support |
|
Fair scheduling of time |
Support |
|
Roaming switching | Support for 802.11k, 802.11v, 802.11r, GP Roaming | |
Layer 2 roaming, layer 3 roaming | ||
Encryption mode | 64 ≤ 128 bit WEP, TKIP, CCMP, WAPI | |
Authentication mode | Cooperate with AC, support WPA. WPA-PSK, WPA2- Enterprise, WPA2-PSK. MAC ground | |
Wireless subscriber layer 2 isolation | Address authentication, Web authentication, PPPoE authentication and other authentication methods | |
WIDS | Support | |
Radius Client | Support | |
Authentication server multi-domain configuration | Support | |
Backup authentication server | Support | |
IP address setting | Support | |
IPv6 | Static IP, DHCP dynamic address acquisition | |
ACL | Support | |
DHCP server | Support | |
NAT | Support (in routing mode) | |
WMM802.11e) | Support (in routing mode) | |
Priority mapping | Support | |
QoS policy mapping | Support | |
Bandwidth management | Support | |
Call Admission Control | Support for SSID-based, user-based bandwidth speed limits | |
CAC | Support | |
Network management | SNMP V1N2cNV3 , Trap , Telnet , FTP/TFTP , WEB | |
Dimension | 213.9mm × 213.9mm × 67.5mm | |
weigth | 2.6kg | |
Etheric Mouth | 1 × 10/100/T00OMbps RJ45 Ethernet G(POE) 1 × 10/100/1000Mbps RJ45 Ethernet port 1 x 10/100/1000Mbps SFP Ethernet port |
|
Antenna entrance | 4 N-type RF switches (external heavy antennas, optional) | |
serial port |
1x232 or 485 serial port, three-pin Phoenix Built-in dual-frequency directional antenna 5.8Ghz: 9dBI horizontal 131 degrees and vertical 60 degrees) |
|
2.4G | 802.11b/g/n: 2.4GHz-2.483GHz (China) | |
5G | 802.11ac/n/a: 5.150GHz-5.350GHz 5.725GHz-5.850GHz (China) | |
Modulation technology | OFDM : [email protected]/9Mbps,[email protected]/18Mbps,[email protected],[email protected]/54Mbps DSSS : [email protected],[email protected],[email protected]/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9 |
|
Modulation mode | 11b:DSS:[email protected]/11Mbps,[email protected],[email protected] 11a/g:OFDM:[email protected]/54Mbps,[email protected],[email protected]/18Mbps,[email protected]/9Mbps 11n: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM 11ac: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM |
|
Maximum transmit power | 20dBm | |
transmission frequency adjustable granularity |
1dBm | |
Working / storage temperature |
-40C-75C/-40C-85 "C | |
working / storage humidity |
0% ≤ 100% (non-condensation) | |
IP protection | IP67 | |
Electrification mode |
Support 802.3at wide voltage power supply | |
grade power consumption | ≤ 22W | |
MTBF | > 250000H |